Effect choice (button switch No.1 to No.4):12 kinds 1. Do not need Push: Meteor 1 2. Push No.1: Meteor 2 3.Push No. 2: Meteor 3 4. Push No.1 &2: Meteor 4 5. Push No.3: Scan left 6. Push No.1 & 3: Scan right 7. Push No.2 & 3: Scan right&left 8. Push No. 1 & 2 & 3: Scan right&left 9. Push No.4: Static Fade 1 10. Push No.1 & 4: Fade 2 11. Push No.2 & 4: Fade scan 1 12. Push No.1 & 2 & 3: Fade scan 2 13. Push No.3 & 4: Twinkle 1 14. Push No.1&3 & 4: Twinkle 2 15. Push No.2&3 & 4: Twinkle 3 16. Push No.1&2&3 & 4: Twinkle 4 Speed Choices (Button Switch No.5 to No. 7) 10 kinds 1. Do not need Push: speed 1 2.Push No.5: speed 2 3. Push No.6: speed 3 4. Push No.5,6: speed 4 5. Push No.7: speed 5 6.Push No.5&7: speed 6 7. Push No.6&7: speed 7 8. Push No.5,6&7: speed 8 DMX: Note: FUN = OFF (the tenth code switch up) means to accept DMX512 signal mode DMX512 start address code is the sum of switches
1-9, at the same time turn downside of the code switch (ON set to "1"),
then the value of the bit can be gotten; coding switch up (set to "0"),
the value of the bit is 0. Example 1: encoding the No. 6,3,2 position on switch dial to "1", others set to "0", then the sum of the switch 1-9 code value is 32 + 4 + 2, that is the DMX512 start address 38 MODE3:Built-in effects Mode Remote instructions:
The first DMX address setting:
The decoder set the address bit by coding switch, of which 1-9 is for
setting the start address of the Binary numeric code switch of DMX512,
the first one is the lowest position, the ninth one is the highest
Bit of address code can be set to 512.
Note: Unit will be in RF mode when the No. 10 switch is turned down
Fiber Optic
light Shooting Star unit is environmental & power saving safe, maintenance free light used for home decoration, under water lighting, billboard, bar, part, super
market and other public places, this led light source supplies single
white light, it could work with all kinds of end-light fibers and
side-light fibers.
Has 20 lighting effects, you can use and size fiber with this unit, each hole is 9/32" opening, secure fibers in Furrel with hot glue or clear epoxy and trim ends flush with connectors.
Specs:
- single white LED Light;
- Power: 5W;
- Light effects modes x 20: stable white, fade, twinkle, shooting star light.
- Easy to setup and Low Maintenance;
- Three ways to control: RF remote, DMX512(1990 agreement), built in platform setting (please check the manual for details);
-10 output ports, diameter of each port: 9mm;
- Constant current adapter(work under 110-240V);
Size Dimensions: 5.8 x 3.5 x 1.24"
Attention:
The
remote is powered by CR2025 button battery(Included),
Due to different manufactured batches, functions of buttons may change from photos.
